2.3 beta
- LePaul
- Reactions:
- Posts: 3981
- Joined: February 7th, 2016, 10:26 pm
- Location: Bangor, Maine USA
- 3D Printer(s): 24 - Yes I have a problem!
- Contact:
Re: 2.3 beta
https://ultimaker.com/en/products/cura-software shows 2.3 Beta ...has it been renamed ?
- Dim3nsioneer
- Reactions:
- Posts: 221
- Joined: February 19th, 2016, 2:13 pm
- Location: Zurich Area, Switzerland
- 3D Printer(s): Ultimaker Original, 2, 2+, 2 Ext+, 3, S5, Form 2
- Contact:
Re: 2.3 beta
Do I see this correct that having 2.1.3 and 2.3 installed on the same windows user is not a good idea due to configuration data conflicts? (I find it disturbing that I have to delete the configuration data of my productive version in order to get the beta version running properly).
@nallath: Does one not usually separate configurations of versions (e.g. by subfolders) if they are not fully compatible...?
btw: I'm not aware of an open-beta folder at the Ultimaker software page... just know the closed-beta folder but nothing there for 2.3. Can you post it or send it by pm? (Maybe it's my not-twenty-anymore brain...)
@nallath: Does one not usually separate configurations of versions (e.g. by subfolders) if they are not fully compatible...?
btw: I'm not aware of an open-beta folder at the Ultimaker software page... just know the closed-beta folder but nothing there for 2.3. Can you post it or send it by pm? (Maybe it's my not-twenty-anymore brain...)
- drayson
- Reactions:
- Posts: 254
- Joined: February 15th, 2016, 5:04 am
- Location: Graz, Austria
- 3D Printer(s): UMO with mods :-)
Re: 2.3 beta
Just open the "closed-beta" folder in your browser and rename the "closed" to "open" in the address bar.Dim3nsioneer wrote: btw: I'm not aware of an open-beta folder at the Ultimaker software page... just know the closed-beta folder but nothing there for 2.3. Can you post it or send it by pm? (Maybe it's my not-twenty-anymore brain...)
-
- Reactions:
- Posts: 138
- Joined: August 7th, 2016, 10:29 pm
- Location: Netherlands
- 3D Printer(s): Ultimaker 2
Re: 2.3 beta
I tried using 2.3 beta, but it will not slice at all. It just is stuck on preparing to slice, no matter what I try. I tried it with both the first version and the new one (at least I think, I downloaded both from the link in nallath's post).
- Dim3nsioneer
- Reactions:
- Posts: 221
- Joined: February 19th, 2016, 2:13 pm
- Location: Zurich Area, Switzerland
- 3D Printer(s): Ultimaker Original, 2, 2+, 2 Ext+, 3, S5, Form 2
- Contact:
Re: 2.3 beta
Got it. Thanks, man.drayson wrote: Just open the "closed-beta" folder in your browser and rename the "closed" to "open" in the address bar.
- LePaul
- Reactions:
- Posts: 3981
- Joined: February 7th, 2016, 10:26 pm
- Location: Bangor, Maine USA
- 3D Printer(s): 24 - Yes I have a problem!
- Contact:
Re: 2.3 beta
I tried it out last night, used the Ultimaker 2 settings and left everything on simple mode. I promised myself I'd upgrade the UM2 before using it...but couldn't resist.
Well, got the classic underextrusion we see so much of. Looks like I'll just upgrade it and save myself some headache!
Well, got the classic underextrusion we see so much of. Looks like I'll just upgrade it and save myself some headache!
Re: 2.3 beta
We have an upgrade script that should work. But it's still a beta for a reasonDim3nsioneer wrote: @nallath: Does one not usually separate configurations of versions (e.g. by subfolders) if they are not fully compatible...?
- LePaul
- Reactions:
- Posts: 3981
- Joined: February 7th, 2016, 10:26 pm
- Location: Bangor, Maine USA
- 3D Printer(s): 24 - Yes I have a problem!
- Contact:
Re: 2.3 beta
That import thing...I'm not sure if I like it or not. I keep just removing the printers and starting fresh.
I notice Normal is now 0.1 and I had not noticed that on a small part I made on my UMO yesterday (an iPhone 6 tripod adapter). I couldn't sort out why a 30 minute print took an hour...but it looks soooo good
I notice Normal is now 0.1 and I had not noticed that on a small part I made on my UMO yesterday (an iPhone 6 tripod adapter). I couldn't sort out why a 30 minute print took an hour...but it looks soooo good
- Dim3nsioneer
- Reactions:
- Posts: 221
- Joined: February 19th, 2016, 2:13 pm
- Location: Zurich Area, Switzerland
- 3D Printer(s): Ultimaker Original, 2, 2+, 2 Ext+, 3, S5, Form 2
- Contact:
Re: 2.3 beta
I would prefer if that import script would make a copy for Cura 2.3 so one still has the original configuration data for 2.1.3. That little bit of additional data shouldn't be a problem...
-
- Reactions:
- Posts: 122
- Joined: April 21st, 2016, 5:29 pm
- Location: Salford, United Kingdom
- 3D Printer(s): Ultimaker 2
Re: 2.3 beta
It's probably me being dumb, but how do I change the nozzle size?
- Neotko
- Reactions:
- Posts: 1142
- Joined: February 7th, 2016, 7:02 pm
- Location: Madrid
- 3D Printer(s): UMO+ x2.5
- Contact:
Re: 2.3 beta
Maybe you can use the um2+ profile to do so? (just don't update the firmware)
- martin-bienz
- Reactions:
- Posts: 172
- Joined: February 22nd, 2016, 2:42 am
- Location: Switzerland
- 3D Printer(s): Ultimaker Original, prusa i3 mk2
Re: 2.3 beta
@danilus, it's in the machines configuration. Settings... Printer ... Manage.... [Machine Settings] (I hope that's true for UM2s also, as I have an UMO.
EDIT: Nope... I created a profile... it's not. Sorry, I have no clue (other than in the settings xmls).
EDIT: Nope... I created a profile... it's not. Sorry, I have no clue (other than in the settings xmls).
-
- Reactions:
- Posts: 122
- Joined: April 21st, 2016, 5:29 pm
- Location: Salford, United Kingdom
- 3D Printer(s): Ultimaker 2
Re: 2.3 beta
Thanks martin, found it where you said. I'm using a custom machine config because I print with Octoprint. If you use the standard UM2 maybe it wont show up.
Re: 2.3 beta
The import script makes a copy of the data it imports from 2.1.3Dim3nsioneer wrote:I would prefer if that import script would make a copy for Cura 2.3 so one still has the original configuration data for 2.1.3. That little bit of additional data shouldn't be a problem...
- martin-bienz
- Reactions:
- Posts: 172
- Joined: February 22nd, 2016, 2:42 am
- Location: Switzerland
- 3D Printer(s): Ultimaker Original, prusa i3 mk2
Re: 2.3 beta
really? I had to ditch my 2.1.3, delete all and restart. After installing 2.3, I had some weird glitches with the settings... after deleting the profile, uninstalling 2.1.3 and re-starting 2.3 all was well.nallath wrote: The import script makes a copy of the data it imports from 2.1.3