I agree. Glue thick can give various thickness even if you try to smudge it around
Diluted wood glue, brushing on and drying has worked great for me. I got about two months of heavy printing out of my first coating. Cleaned and re-applied...works great
Ultimaker Original+ -- Green Edition
-
nilrog
- Reactions:
- Posts: 438
- Joined: February 24th, 2016, 4:48 pm
- Location: Örsundsbro, Sweden
- 3D Printer(s): UMO+
Re: Ultimaker Original+ -- Green Edition
This weekend I assembled the last parts of the #gudoZGE and threw out the stock UMO+ feeder 
This version is an all-PLA version as I didn't want to try printing the flexible parts with the stock feeder. So next up I will order some flexible filament and print those parts with this feeder. So by time I will slowly upgrade this feeder to become better and better. But already in this state I like it a lot better than the stock one...even if it is still not as good as it could be.
I didn't have much time to play with it yet...but I did some small test prints and they look ok with the same profile that I used before in S3D.
https://twitter.com/nilrog/status/863451095535898624
This version is an all-PLA version as I didn't want to try printing the flexible parts with the stock feeder. So next up I will order some flexible filament and print those parts with this feeder. So by time I will slowly upgrade this feeder to become better and better. But already in this state I like it a lot better than the stock one...even if it is still not as good as it could be.
I didn't have much time to play with it yet...but I did some small test prints and they look ok with the same profile that I used before in S3D.
https://twitter.com/nilrog/status/863451095535898624