I am look for any information about Anycubic Slicer Next 1.3.2 is an open-source slicing software developed based on Orcaslicer.
It would be great if I could find a Users guide to allow me to read all about the operation of this slicer.
It is not like I can not figure out enough to be able to print or configure it.
Though it would sure be much easier if I have a users guide to the slicer.
A lot of it is simple as I have used other slicers that operate the same.
It has a complete section for painting your model, as to print in color.
It has a somewhat confusing way of adding modifiers.
If in your web searches you see a users guide to help me please post a link here.
Re: Anycubic Slicer Next
Posted: December 30th, 2024, 2:23 pm
by LePaul
Teaching Tech has some great tutorials....
Re: Anycubic Slicer Next
Posted: January 16th, 2025, 8:10 pm
by Roberts_Clif
Today I am 3D Printing with My Kobra 3 an G-Code created from Orca Slicer 2.2.0 Based on PrusaSlicer, and BambuStudio.
I read that this was not possible, that the AnyCubic slicers had special code to operate the Kobra 3 correctly.
Note : I am only printing with a single color, Still It works so let me continue with the next print in color.
It 3D Printed with perfect color sequence no problems, I wonder what their problems with printing the Kobra 3 in color without AnyCubic Slicer or AnyCubic Slicer Next was...
Now I can not send the G-Code directly to the Printer Yet but I will Find a way
Re: Anycubic Slicer Next
Posted: March 7th, 2025, 8:22 am
by Roberts_Clif
Anycubic Slicer Next 1.3.3 For Windows
What's new:
1. Added "Skip Part" feature (Currently for S1, version ≥2.8.4.3)
2. Improved login region prompts.
3. Fixed temperature errors when leveling with multi-color filament box.
4. Enhanced overhang printing quality
5. Added support for Anycubic Kobra 3 Max and new filament profiles:
PLA Silk @Anycubic Kobra S1
PLA Luminous @Anycubic Kobra S1
PLA Silk @Anycubic Kobra 2 Max
PLA Marble @Anycubic Kobra 3
6. Optimized layer change and pause commands for Kobra 2 Pro/Plus/Max
Re: Anycubic Slicer Next
Posted: March 11th, 2025, 9:06 am
by Roberts_Clif
Received this message from AnyCubic today
Hello,
Thank you for your inquiry. Do you need the open source code of Anycubic Slice?
If so, you can check it at this link: github.com/ANYCUBIC-3D/AnycubicSlicer
The open source code of Slicer Next is expected to be released this year.
Please feel free to contact us if we can be of further assistance.
Thank you!
Best regards,
Anycubic support team
Kindly ensure to check both your email and spam folder for our response.
Tips: We recommend adding our email address to your contacts list.
And of course this page only has the open commons license doc.
Hopefully this will be sooner than later part of this year.
Re: Anycubic Slicer Next
Posted: April 24th, 2025, 10:27 am
by Roberts_Clif
Today noticed the Anycubic Slicer Next finally adds updates to Version 1.3.4.0 using OrcaSlicer 2.3.0 orgins.
The main difference in Anycubic Slicer Next 1.3.4.0 is the addition of multi-terminal login, allowing users to open multiple slicing software instances on the same computer, and support for up to two separate computers being logged in simultaneously. The update also includes the integration of MakerOnline on the homepage, enabling browsing, searching, and collection of models. Additionally, the update includes printer profile additions, such as Kobra S1 parameters, and optimizations and bug fixes for various issues like G-code path rendering and fan speed display on certain models.
Here's a more detailed breakdown of the changes:
New Features:
Multi-terminal login:
Allows users to open and use multiple slicing software instances on the same computer and log in from up to two different computers.
MakerOnline integration:
The homepage now embeds MakerOnline, providing access to model browsing, searching, and collection features.
Optimizations and Bug Fixes:
• Printer Profile Additions: Added Kobra S1 printer parameters, as well as Kobra, Kobra Max, and Kobra Plus printing parameters (derived from OrcaSlicer).
• M900 and Retract Z Lift Command Optimization: Improved the behavior of M900 and retract Z lift commands.
• G-code Rendering Fix: Fixed occasional G-code path rendering errors.
• Routing Preview Fix: Resolved abnormal routing issues when previewing with more than two wall layers.
• Fan Speed Display Fix: Corrected the issue of abnormal fan speed display on the K2 Pro.
This means I can now use Anycubic slicer Next while comparing all code between it and Orca 2,3.0 to see how well AnyCubic fared in these updates...
Good I now can use the different build plates without having to back slide using USB drive transfers to my Kobra 3 Combo 3D printer.
Re: Anycubic Slicer Next
Posted: April 24th, 2025, 5:31 pm
by LePaul
Yeah I hate how the manufacturers make their own fork of things like Cura and never update it
It would be way easier if they just submitted the printer profile to the dev team
I'm starting to try out Orca on some of my CR-10S machines.
Re: Anycubic Slicer Next
Posted: April 24th, 2025, 6:00 pm
by Roberts_Clif
I really like Orca Slicer, an am glad they chose to use it though would have excepted most of the most popular Slicers.
Though really like the ability of manufacturers to store multiple bed surfaces and select on demand,
You are correct.
If they would release enough data so any slicer could include their 3D Printer they would be ahead in all aspects.
More people would purchase their products, more models developed would include their printers ect...
They would end up in a better developmental position than currently, in simple words people would like their products.
As a matter of timing I am currently trying to decide on which will be my next 3D Printer, believe it on not Kobra 3 in on the list.
The timer shows 3 days 7 hours 30 minutes to click buy it now.
Re: Anycubic Slicer Next
Posted: May 28th, 2025, 7:05 pm
by Roberts_Clif
To those of use who have an Anycubic Kobra 3 Combo do not upgrade to Slicer 1.3.4 to Anycubic Slicer Next Version Update 1.3.5.0
When I upgraded to new Anycubic Slicer Next Version Update 1.3.5.1 photo below, I lost all my presets.
Quickly restored to previous restore point to restore to previous Anycubic Slicer Next Version Update 1.3.4 settings.
Here are three quotes plus my Post here and I still have Anycubic Slicer Next Version 1.3.5.1.exe
I feel like maybe next slicer version 1.3.5 was recalled.
I have 1.3.4 and it says it's the latest version. All my other computers say the same thing. And the anycubic website says the latest version is also 1.3.4.
Same here. I reinstallt the 1.3.4 yesterday after a lot of trouble.
Today I checked for a newer version and it said also: "Newest version"
Is good that anycubic recalled it. 1.3.5 has a lot of problems.
Same, seems like they might have pulled the release. Maybe has to do with the fact that it deleted people's profiles.
Re: Anycubic Slicer Next
Posted: May 28th, 2025, 7:06 pm
by Roberts_Clif
Found another post and Anycubic 1.3.5.0 was bad
Now Anycubic 1.3.5.1 is suppost to be ok for now 48 hours later
Though you need to save your profiles because they will still have to be manually restored in Anycubic Slicer 1.3.5.1.
Re: Anycubic Slicer Next
Posted: May 29th, 2025, 4:17 pm
by Roberts_Clif
And this is how it works, Another Anycubic Slicer Next 1.3.5.2
Now I have to try another version slicer Anycubic Slicer Next 1.3.5.2 out now
1.Fixed sending errors during multi-plate printing
2.Fixed occasional crashes during remote printing
Have only 3D Printed one rose.
See nothing about fixing loosing old profiles when installing Anycubic Slicer Next 1.3.5.1 or 1.3.5.0