How to make the NTC glue on ceramic heater more stable?

Discussion of General / RepRap style printers! FDM/FFF printers that aren't gigantic!
Post Reply
Vivi Wang
Reactions:
Posts: 2
Joined: August 16th, 2022, 6:16 am
3D Printer(s): FFF

How to make the NTC glue on ceramic heater more stable?

Post by Vivi Wang »

We try many glue but after heating, NTC still will fall off, do you have better solution? :?:
reibuehl
Reactions:
Posts: 506
Joined: February 9th, 2016, 9:56 am
Location: Stuttgart, Germany
3D Printer(s): Ultimaker 2

Re: How to make the NTC glue on ceramic heater more stable?

Post by reibuehl »

Did you try any high temperature epoxy resins? Most of them are good for temperatures of up to 180*C or 200*C but there are also more specialized variants for temperatures of 200-280*C or even 340*C. The problem might just be to get them in super small quantities if you only need it for one bed.
Post Reply

Return to “General / RepRap Printers”