Hi. I has a novate and I has a new Me Creators 2 and I test the stepper motors with Repeiter Host and all ok in the test but when printing the extruder go to Home and printing only in Home location. In repeiter Host Manual Control I see the positión of the extruder painting the model but in the printer the extruder don´t move X and Y location. Only Z Axis.
I don´t know how resolve this and I need help. Thank you.
Motors X and Y don´t move when printing
-
Roberts_Clif
- Reactions:
- Posts: 1382
- Joined: March 25th, 2017, 8:17 am
- Location: Washington, State USA
- 3D Printer(s): Hictop 3DP11/12
Re: Motors X and Y don´t move when printing
Sorry so long to get help!
Could you make a short video'.
Could you post a link to short video to google drive or what ever you storage for online is.
This will give us a better ideal of what could be going on.
The video should include sound.
I know that if for some reason my slicer is setup to a configuration that is not supported by my 3D printer is will act badly.
Could you make a short video'.
Could you post a link to short video to google drive or what ever you storage for online is.
This will give us a better ideal of what could be going on.
The video should include sound.
I know that if for some reason my slicer is setup to a configuration that is not supported by my 3D printer is will act badly.