Tinker : Adjust Z position

Topics related to printer firmware
Post Reply
User avatar
darkdvd
Reactions:
Posts: 53
Joined: February 27th, 2016, 6:01 am
Location: France
3D Printer(s): UM2/UM2+

Tinker : Adjust Z position

Post by darkdvd »

Can someone explain to me how to use this function or how it works?

Merci !
Anders Olsson
Reactions:
Posts: 415
Joined: February 8th, 2016, 8:37 pm
Location: Uppsala, Sweden
3D Printer(s): UM2 UM2E, UM2Go, UM3, Delta Tower, Form 1+, Form 2
Contact:

Re: Tinker : Adjust Z position

Post by Anders Olsson »

I assume that you mean the one in the Advanced -> Expert settings menu?

The head moves to the center of the bed and you then move the build plate up until it touches the nozzle (no paper in between the nozzle and the glass).
Store the setting and you are done!

I use it a lot when changing between different prototype nozzles with varying length.
That way I don't have to go through the whole "Adjust buildplate" cycle every time.
User avatar
darkdvd
Reactions:
Posts: 53
Joined: February 27th, 2016, 6:01 am
Location: France
3D Printer(s): UM2/UM2+

Re: Tinker : Adjust Z position

Post by darkdvd »

Thank You Anders !
Post Reply

Return to “Firmware”