extruder retracts the filament all the way out above the nozzle

Discussion of General / RepRap style printers! FDM/FFF printers that aren't gigantic!
Post Reply
newjeeper369
Reactions:
Posts: 20
Joined: October 31st, 2017, 4:41 pm
3D Printer(s): anet a8 pursa i3

extruder retracts the filament all the way out above the nozzle

Post by newjeeper369 »

I am just getting started in 3D printing, i am using the newest version of cura (3.0 i think). i have not been able to successfully print anything or even finish a print, a few minutes into the print the extruder retracts the filament all the way out above the nozzle tube and into the gear. i have tried to adjust the retraction in cura, even setting it to 0.

note:
-anet a8 pursa i3 printer
-using Hatchbox PLA at 190c
-using firmware that came with the printer
-using cura's anet A8 presets
-printing via USB
secondary questions:

-PLA recommended general settings for the Anet A8 Pursa i3? (a good place to start)
-should i update firmware if so what version and where do i find it?
-is cura even good? if you recommend something else what? and what settings do you recommend?
-can you provide tips or links to information to help me dial in the Anet A8 Pursa i3?
User avatar
LePaul
Reactions:
Posts: 3966
Joined: February 7th, 2016, 10:26 pm
Location: Bangor, Maine USA
3D Printer(s): 24 - Yes I have a problem!
Contact:

Re: extruder retracts the filament all the way out above the nozzle

Post by LePaul »

I moved your post to the Reprap area, since you have a A8 Prusa i3 (not an Utimaker, which is where you posted)

Hopefully someone can help you out :)
User avatar
Roberts_Clif
Reactions:
Posts: 1372
Joined: March 25th, 2017, 8:17 am
Location: Washington, State USA
3D Printer(s): Hictop 3DP11/12

Re: extruder retracts the filament all the way out above the nozzle

Post by Roberts_Clif »

Does your Anet A8 Prusa i3 Have a filament run-out sensor. If so if may have a intermittent connection.
newjeeper369
Reactions:
Posts: 20
Joined: October 31st, 2017, 4:41 pm
3D Printer(s): anet a8 pursa i3

Re: extruder retracts the filament all the way out above the nozzle

Post by newjeeper369 »

No filament run out sensor.
newjeeper369
Reactions:
Posts: 20
Joined: October 31st, 2017, 4:41 pm
3D Printer(s): anet a8 pursa i3

Re: extruder retracts the filament all the way out above the nozzle

Post by newjeeper369 »

When it does retract the filament all the way out, the feeding gear spins multiple times and quite fast. Im not sure if i am using the correct cura profile and or setting.
newjeeper369
Reactions:
Posts: 20
Joined: October 31st, 2017, 4:41 pm
3D Printer(s): anet a8 pursa i3

Re: extruder retracts the filament all the way out above the nozzle

Post by newjeeper369 »

LePaul wrote: October 31st, 2017, 5:18 pm I moved your post to the Reprap area, since you have a A8 Prusa i3 (not an Utimaker, which is where you posted)

Hopefully someone can help you out :)
Thank you LePaul!
User avatar
Roberts_Clif
Reactions:
Posts: 1372
Joined: March 25th, 2017, 8:17 am
Location: Washington, State USA
3D Printer(s): Hictop 3DP11/12

Re: extruder retracts the filament all the way out above the nozzle

Post by Roberts_Clif »

Well let's start there, Here are my Cura Profiles. They should work for you.

For 1.75mm Filament
Cura 2.6.2.zip
(2.19 KiB) Downloaded 481 times
Will import into Cura 3.0.3

Start Cura, Select Settings, Add Printer.
Select Custom, Select Prusa i3

Select Preferences, Select Printers, Select Machine Settings.
Change your printer settings.

This is a good starting point.
newjeeper369
Reactions:
Posts: 20
Joined: October 31st, 2017, 4:41 pm
3D Printer(s): anet a8 pursa i3

Re: extruder retracts the filament all the way out above the nozzle

Post by newjeeper369 »

Thank you i will try that, and report back.
newjeeper369
Reactions:
Posts: 20
Joined: October 31st, 2017, 4:41 pm
3D Printer(s): anet a8 pursa i3

Re: extruder retracts the filament all the way out above the nozzle

Post by newjeeper369 »

Like i said i am new to this, the link below is were i got my printer from. I hear there are clones and copies so i am not sure exactly what i have, so here is what and where i ordered my printer from.

https://www.sainsmart.com/collections/3 ... 3d-printer
newjeeper369
Reactions:
Posts: 20
Joined: October 31st, 2017, 4:41 pm
3D Printer(s): anet a8 pursa i3

Re: extruder retracts the filament all the way out above the nozzle

Post by newjeeper369 »

Roberts_Clif wrote: November 1st, 2017, 8:18 am Well let's start there, Here are my Cura Profiles. They should work for you.

For 1.75mm Filament
Cura 2.6.2.zip
Will import into Cura 3.0.3

Start Cura, Select Settings, Add Printer.
Select Custom, Select Prusa i3

Select Preferences, Select Printers, Select Machine Settings.
Change your printer settings.

This is a good starting point.
whats the difference between the profiles?
newjeeper369
Reactions:
Posts: 20
Joined: October 31st, 2017, 4:41 pm
3D Printer(s): anet a8 pursa i3

Re: extruder retracts the filament all the way out above the nozzle

Post by newjeeper369 »

print quality?
User avatar
Roberts_Clif
Reactions:
Posts: 1372
Joined: March 25th, 2017, 8:17 am
Location: Washington, State USA
3D Printer(s): Hictop 3DP11/12

Re: extruder retracts the filament all the way out above the nozzle

Post by Roberts_Clif »

Have you tried the Cura settings. You can adjust them to meet your printers requirements.
Post Reply

Return to “General / RepRap Printers”