Ultimaker 2+ feeder re-assembly!

Discussions concerning the Ultimaker 2 / Ultimaker 2+ series of printers, including the Ultimaker 2 Go
User avatar
Neotko
Reactions:
Posts: 1142
Joined: February 7th, 2016, 7:02 pm
Location: Madrid
3D Printer(s): UMO+ x2.5
Contact:

Re: Ultimaker 2+ feeder re-assembly!

Post by Neotko » March 24th, 2017, 6:50 pm

Umm? I wasn't gonna do more profiles:D

Now go try test print. Takes time to master a repetition print. But is doable.

Also I watch the print while printing, learn of what does wrong, check the layer preview, adjust, experiment. Is the only way to print anything slightly complex.

“How do you get to Carnegie Hall?”
“Practice, practice, practice”

User avatar
Frederik
Reactions:
Posts: 23
Joined: February 23rd, 2017, 9:10 pm
Location: Aachen, Germany
3D Printer(s): Ultimaker Original plus

Re: Ultimaker 2+ feeder re-assembly!

Post by Frederik » March 26th, 2017, 4:43 am

Your Model is not watertight. (purple edge)
This »should« be corrected by the slicer, but you never know. The strangest issues arise from minor file defects like this :)
Attachments
Bildschirmfoto 2017-03-26 um 10.38.24.png

Post Reply

Return to “Ultimaker 2 / Ultimaker 2+ / Extended & Go”