Try the 'Slow PWM Fan' firmwareLePaul wrote: Just trying to solve the PWM noise issue!
No fanLePaul wrote: Were you able to do that without fan or minimal?
Trying to get the Neotko Original up and running first...Neotko wrote: If you fell 'brave'. I just published an untested 40x40 fancap based on my just finished umo/um2 fancap.
... That's not plug and play
I have a couple of issues...
- It is a bit to high (against the heater bloc). That is not a big issue, because I have play on the sandwich, so I can shim under and that should work (I just shimmed the fan right now to check the clearance.
- More annoying is that the rear fan screws are in the way for the XY blocks. I might solve that with countersunk screws that would go in the fan screw hole
- But then, even without the fan screws I cannot reach the x-stop because the screw of the XY-block comes against the top part of the sandwich The plan for that one is to reverse the XY-block screw, having the nut towards the front side...