UMO motion settings

Discussion of the Ultimaker Original and Ultimaker Original + (kit and pre-assembled) printers
User avatar
Neotko
Reactions:
Posts: 1142
Joined: February 7th, 2016, 7:02 pm
Location: Madrid
3D Printer(s): UMO+ x2.5
Contact:

Re: UMO motion settings

Post by Neotko »

This is how it should be printed, to make the circles and squares make suden changes on the toolhead movement to make ringing

Use 0 Infill and 2-3 o 4 perimeters, no top or bottom layers.
Captura de pantalla 2017-01-03 a las 17.56.11.png
Captura de pantalla 2017-01-03 a las 17.55.22.png
Example of a print using 3 process and different accel/yerk on each block as it changes process
IMG_3501.jpeg
User avatar
antiklesys
Reactions:
Posts: 183
Joined: February 13th, 2016, 8:01 am
3D Printer(s): UMO

Re: UMO motion settings

Post by antiklesys »

gudo wrote:Hi antiklesys !
Seeing the photos, it seems you have also a Z problem !?
Might be just lubrication, running a lot of stuff currently with the UMO, will have to look into this too :)
Post Reply

Return to “Ultimaker Original & Ultimaker Original +”