More great prints !
Posted: October 19th, 2017, 8:09 am
I've been printing the BB-8 circular panels. Minimal support, just on the edges to aide in adhesion and then under the center and where there are openings/holes.
Simplify3D time projections are way off, but this took 49 hours.
0.2mm layer height from bottom to mid ring, then 0.1mm for the rest. 20% infill
Simplify3D time projections are way off, but this took 49 hours.
0.2mm layer height from bottom to mid ring, then 0.1mm for the rest. 20% infill