Temperature problems?

Creality brand 3D Printers!
Post Reply
Emwyo
Reactions:
Posts: 3
Joined: November 16th, 2018, 4:09 pm
3D Printer(s): Creality3D cr10

Temperature problems?

Post by Emwyo »

Hello guys!

I have bought a new PLA filament ( Spectrum brand ) but i have issues with printing. It's not sticking, or not melting? I do not know.
Crealiy cr-10
Slicer: cura
Already tried:
-Lowered the cooling fan speed down to 40%
-Multiple nozzle size ( 0,2 and 0,4 )
-print with 180C° - 230C°
Link for my settings:
https://imgur.com/a/5YAECeh
Attachments
20181116_163335.jpg
20181115_174807.jpg
20181115_174736.jpg
User avatar
LePaul
Reactions:
Posts: 3963
Joined: February 7th, 2016, 10:26 pm
Location: Bangor, Maine USA
3D Printer(s): 24 - Yes I have a problem!
Contact:

Re: Temperature problems?

Post by LePaul »

That's some serious underextrusion going on.
Which version of Cura? Download the latest

While made with the Ultimaker 3D printers in mind, this is still a useful resource
https://support.3dverkstan.se/article/2 ... ting-guide
Emwyo
Reactions:
Posts: 3
Joined: November 16th, 2018, 4:09 pm
3D Printer(s): Creality3D cr10

Re: Temperature problems?

Post by Emwyo »

Newest cura downloaded.
Thanks for the link, going to check it. :)
Emwyo
Reactions:
Posts: 3
Joined: November 16th, 2018, 4:09 pm
3D Printer(s): Creality3D cr10

Re: Temperature problems?

Post by Emwyo »

Im just tried another PLA filament which is worked well. So i guess something bad with the another PLA filament.
User avatar
Roberts_Clif
Reactions:
Posts: 1372
Joined: March 25th, 2017, 8:17 am
Location: Washington, State USA
3D Printer(s): Hictop 3DP11/12

Re: Temperature problems?

Post by Roberts_Clif »

I see you found your filament could have been the most likely cause, good for you. Filament problems can be a hard problem to diagnose.

If you have not already done so read the posts on this forum, there is a lot of good information to learn. An a lot of good members to learn from.
Stick around, learn the new 3D Printer innovation with us, and please post what you have learned and any problems you may come across.
Post Reply

Return to “Creality Large Scale 3D Printers”