Octoprint on the Creality CR-10

Wireless/network connectivity to print, control and monitor prints!
Post Reply
User avatar
Posts: 3341
Joined: February 7th, 2016, 10:26 pm
Location: Bangor, Maine USA
3D Printer(s): UM2+,CR-10S (x2),Tevo Tornado,FT-i3/FT-5/FT-6...

Octoprint on the Creality CR-10

Post by LePaul » July 14th, 2017, 11:58 pm

Quick tips...

Baud Rate is 115200

Serial Port has to be set to USB (/dev/tty/USB0), Auto will not work.

I had troubles with two old USB cables I had around. Neither would work, a third one I dug up did. So this print is fussy with cables!

Post Reply

Return to “Wireless Printing and Controllers”