New 3D Printer build

Have a problem or question, suggested links/information/FAQ's? Post it here
KevinA
Posts: 4
Joined: August 2nd, 2016, 6:17 pm
3D Printer(s): MKS GEN 1.4 / HICTOP

New 3D Printer build

Postby KevinA » August 2nd, 2016, 9:20 pm

Just finished building a HICTOP 3DP11 and decided it needed a wiring harness instead of the one length fits all vendor decision. I can find all the pins and bodies for the Dupont servo style connectors but the XH2.54 JST style connectors are a problem. Does anyone have the part number for the pins of the XH2.54 or JST style connectors?

Thanks

User avatar
LePaul
Posts: 1921
Joined: February 7th, 2016, 10:26 pm
Location: Bangor, Maine USA
3D Printer(s): Ultimaker Original, Ultimaker 2
Contact:

Re: New 3D Printer build

Postby LePaul » August 2nd, 2016, 11:52 pm

Moved this to the HICTOP RepRap Prusa I3 area for you :)

User avatar
Chip Luck
Posts: 190
Joined: February 11th, 2016, 9:12 am
Location: Central Florida
3D Printer(s): HICTOP Reprap Prusa I3
Contact:

Re: New 3D Printer build

Postby Chip Luck » August 15th, 2016, 11:20 am

KevinA wrote:Just finished building a HICTOP 3DP11 and decided it needed a wiring harness instead of the one length fits all vendor decision. I can find all the pins and bodies for the Dupont servo style connectors but the XH2.54 JST style connectors are a problem. Does anyone have the part number for the pins of the XH2.54 or JST style connectors?

Thanks


Not off hand, you might want to search on the internet or post to the official RepRap forums over there, they have a large crowd...
http://forums.reprap.org/list.php?406

KevinA
Posts: 4
Joined: August 2nd, 2016, 6:17 pm
3D Printer(s): MKS GEN 1.4 / HICTOP

Re: New 3D Printer build

Postby KevinA » August 26th, 2016, 12:38 pm

The XH terminals are called XH2.54mm Female Pin Connector Terminal but after you find them they add they are for DUPONT connectors, they aren't, see images.
XH connector part numbers chart to search images and a Dupont Kit I found...

I have a Molex tool (63819-0000 ) that I modified to use to crimp the these connectors.
Attachments
dupont-kit.jpg
Everything but a crimp tool and wire
dupount-terminals.jpg
These are the Dupont terminals
XH-terminals.jpg
These are JST XH 2.54 Terminals that are sometimes called Dupont terminals from China
XH connector sizes and part numbers-l500.jpg
This is a part number chart for the Socket


Return to “General Questions”

Who is online

Users browsing this forum: No registered users and 1 guest