Installing Vinyl Transfer Paper
Will Vinyl transfer paper Hold my Part
Thank you "will look into captions", was in a hurry this time !!!" don't know why.LePaul wrote: ↑July 4th, 2017, 12:11 pmI'd offer a few suggestions on the videos...
- Timelapse is a wonderful thing
- Focus seems off (I can relate, I have a DSLR that just won't focus well in video mode)
- Maybe some captions?
- Does the vinyl transfer paper rip or deteriorate over multiple prints?
I have used Vinyl Transfer Paper Tape on the stock bare Aluminum Bed heated bed up to 60°C it has worked great. Even thought of going with low tack transfer tape. Although upgraded to a Build Tack surface and the Medium tack Tape does not bare as well on this type of surface. And some wrinkles usually during the cooling process, just squeegee it down again. I may just purchase a sampler roll of some high tack Tape too see if it fairs better.drayson wrote: ↑July 5th, 2017, 4:40 amI always use painters tape for transfer my cuts but that´s a reason for buying some transfer tape
basically it is the same methodology as on the original UMO without heated bed so I would be interested in how the transfer tape reacts to heat applied from the bed? any findings?
Users browsing this forum: No registered users and 1 guest