Tinker_16.01 problem

Topics related to printer firmware
Post Reply
User avatar
darkdvd
Reactions:
Posts: 53
Joined: February 27th, 2016, 6:01 am
Location: France
3D Printer(s): UM2/UM2+

Tinker_16.01 problem

Post by darkdvd »

Hi !
Little problem with Tinker_16.01 firmaware on two UM2 : sometimes, the LCD freeze during print. button is working but the LCD is completly freeze.
Two times today on the two printers : one with a 3 hours print, one on a 13 hours print (oups).
During this time, the printers continue to print without problem....

David

(note : my french is better than my English...)
User avatar
darkdvd
Reactions:
Posts: 53
Joined: February 27th, 2016, 6:01 am
Location: France
3D Printer(s): UM2/UM2+

Re: Tinker_16.01 problem

Post by darkdvd »

Strange but the LCD screen is working now ! 07:29 left (freezing at 10:34 left)
User avatar
martin-bienz
Reactions:
Posts: 172
Joined: February 22nd, 2016, 2:42 am
Location: Switzerland
3D Printer(s): Ultimaker Original, prusa i3 mk2

Re: Tinker_16.01 problem

Post by martin-bienz »

So it's probably a lcd update issue "only" as the printer continues to print? I am sure he will fix this :)
User avatar
darkdvd
Reactions:
Posts: 53
Joined: February 27th, 2016, 6:01 am
Location: France
3D Printer(s): UM2/UM2+

Re: Tinker_16.01 problem

Post by darkdvd »

This is not a big problem: the print ends perfectly, as an UMO without LCD PANEL!
User avatar
Neotko
Reactions:
Posts: 1142
Joined: February 7th, 2016, 7:02 pm
Location: Madrid
3D Printer(s): UMO+ x2.5
Contact:

Re: Tinker_16.01 problem

Post by Neotko »

Maybe it's cross talking. Separate the lcd cables and fix them a bit away with some blue tape.
User avatar
darkdvd
Reactions:
Posts: 53
Joined: February 27th, 2016, 6:01 am
Location: France
3D Printer(s): UM2/UM2+

Re: Tinker_16.01 problem

Post by darkdvd »

:shock:
Neotko wrote:Maybe it's cross talking. Separate the lcd cables and fix them a bit away with some blue tape.
Same problem with two UM2 ?
User avatar
Neotko
Reactions:
Posts: 1142
Joined: February 7th, 2016, 7:02 pm
Location: Madrid
3D Printer(s): UMO+ x2.5
Contact:

Re: Tinker_16.01 problem

Post by Neotko »

It happens sometimes on one of my umo+ (Same board different screen) screen banishes. But only sometimes (like one in a month). Much less since I separated the cables.
User avatar
darkdvd
Reactions:
Posts: 53
Joined: February 27th, 2016, 6:01 am
Location: France
3D Printer(s): UM2/UM2+

Re: Tinker_16.01 problem

Post by darkdvd »

OK, I understand.
I'll do a downgrade of firmware as a test, as requested me tinkergnome.
But for me, the same problem on two UM2, it's software, not hardware.
User avatar
TinkerGnome
Reactions:
Posts: 8
Joined: February 24th, 2016, 8:18 am
3D Printer(s): Ultimaker2

Re: Tinker_16.01 problem

Post by TinkerGnome »

It seems that it happens with the standard firmware too:

Screen/Input Freezing But Still Printing

...hmmmm rushour on the I2C bus...? Arduino experts present?
Post Reply

Return to “Firmware”