Tinker_16.01 problem

Topics related to printer firmware
User avatar
darkdvd
Posts: 38
Joined: February 27th, 2016, 6:01 am
3D Printer(s): UM2/UM2+

Tinker_16.01 problem

Postby darkdvd » March 3rd, 2016, 6:28 am

Hi !
Little problem with Tinker_16.01 firmaware on two UM2 : sometimes, the LCD freeze during print. button is working but the LCD is completly freeze.
Two times today on the two printers : one with a 3 hours print, one on a 13 hours print (oups).
During this time, the printers continue to print without problem....

David

(note : my french is better than my English...)
"Qui ne connaît pas l'histoire ne connaît rien"
Edward johnston, 1990

User avatar
darkdvd
Posts: 38
Joined: February 27th, 2016, 6:01 am
3D Printer(s): UM2/UM2+

Re: Tinker_16.01 problem

Postby darkdvd » March 3rd, 2016, 9:54 am

Strange but the LCD screen is working now ! 07:29 left (freezing at 10:34 left)
"Qui ne connaît pas l'histoire ne connaît rien"
Edward johnston, 1990

User avatar
martin-bienz
Posts: 172
Joined: February 22nd, 2016, 2:42 am
Location: Switzerland
3D Printer(s): Ultimaker Original, prusa i3 mk2

Re: Tinker_16.01 problem

Postby martin-bienz » March 3rd, 2016, 10:32 am

So it's probably a lcd update issue "only" as the printer continues to print? I am sure he will fix this :)

User avatar
darkdvd
Posts: 38
Joined: February 27th, 2016, 6:01 am
3D Printer(s): UM2/UM2+

Re: Tinker_16.01 problem

Postby darkdvd » March 3rd, 2016, 12:42 pm

This is not a big problem: the print ends perfectly, as an UMO without LCD PANEL!
"Qui ne connaît pas l'histoire ne connaît rien"
Edward johnston, 1990

User avatar
Neotko
Posts: 990
Joined: February 7th, 2016, 7:02 pm
Location: Madrid
3D Printer(s): UMO+ x2.5
Contact:

Re: Tinker_16.01 problem

Postby Neotko » March 3rd, 2016, 12:53 pm

Maybe it's cross talking. Separate the lcd cables and fix them a bit away with some blue tape.

User avatar
darkdvd
Posts: 38
Joined: February 27th, 2016, 6:01 am
3D Printer(s): UM2/UM2+

Re: Tinker_16.01 problem

Postby darkdvd » March 3rd, 2016, 1:44 pm

:shock:
Neotko wrote:Maybe it's cross talking. Separate the lcd cables and fix them a bit away with some blue tape.

Same problem with two UM2 ?
"Qui ne connaît pas l'histoire ne connaît rien"
Edward johnston, 1990

User avatar
Neotko
Posts: 990
Joined: February 7th, 2016, 7:02 pm
Location: Madrid
3D Printer(s): UMO+ x2.5
Contact:

Re: Tinker_16.01 problem

Postby Neotko » March 3rd, 2016, 1:57 pm

It happens sometimes on one of my umo+ (Same board different screen) screen banishes. But only sometimes (like one in a month). Much less since I separated the cables.

User avatar
darkdvd
Posts: 38
Joined: February 27th, 2016, 6:01 am
3D Printer(s): UM2/UM2+

Re: Tinker_16.01 problem

Postby darkdvd » March 3rd, 2016, 2:17 pm

OK, I understand.
I'll do a downgrade of firmware as a test, as requested me tinkergnome.
But for me, the same problem on two UM2, it's software, not hardware.
"Qui ne connaît pas l'histoire ne connaît rien"
Edward johnston, 1990

User avatar
TinkerGnome
Posts: 7
Joined: February 24th, 2016, 8:18 am
3D Printer(s): Ultimaker2

Re: Tinker_16.01 problem

Postby TinkerGnome » March 23rd, 2016, 5:05 pm

It seems that it happens with the standard firmware too:

Screen/Input Freezing But Still Printing

...hmmmm rushour on the I2C bus...? Arduino experts present?


Return to “Firmware”

Who is online

Users browsing this forum: No registered users and 1 guest