Using larger nozzles on the UMO

Let's discuss how using different nozzle sizes can make a big..or little...difference
User avatar
Posts: 604
Joined: February 12th, 2016, 2:29 am
Location: England
3D Printer(s): Ultimaker 2

Re: Using larger nozzles on the UMO

Post by Izzy »

If you upgrade your UM2 to the Olsson Block it's worth increasing the wattage of the heater, I'm running it with a 35W heater and love it.
Posts: 77
Joined: February 24th, 2016, 6:10 am
3D Printer(s): UMOriginal - UM2Go

Re: Using larger nozzles on the UMO

Post by PeggyB »

you can also drill the UMO nozzles yourself, there is a youtube movie howto. Place the nozzle in the drill and hold the drill in your hand, The drill will center itself in the excising hole. I did a 0.6 and 0.8 and some nozzles for others at an Ultimaker evening, it's easy...
Post Reply

Return to “Using different nozzle sizes”