Page 1 of 1

Nova Hotend

Posted: February 25th, 2019, 10:09 am
by Roberts_Clif
Nova Hot-end not endorsing - just requesting opinions.

Wanted to show you this Hot-End I ran across. If it works as good as Kick Starter claims maybe we should have discussion.

With 3 different power Heaters 60wt, 80wt and 100wt
An claims of 3D Printing at 300mm/sec thought I would bring it to the forums attention.

What does everyone think about the possibilities of 3D Printing at 300mm/sec.
I know this interests me even though my 3D Printer may never 3D Print at 300mm/sec.
Would be a substantial leap to double my current print Speed of 86mm/sec to 172mm/sec, though it may require some added Support Bracing.

Bring forth your opinions on the possibilities of this new Kick Starter Hot-end.

Re: Nova Hotend

Posted: June 11th, 2019, 9:55 am
by Roberts_Clif
No comments on this Nova multi wattage Heater Hotend.

Re: Nova Hotend

Posted: June 11th, 2019, 10:02 am
by LePaul
I haven't looked at it...I've been drooling over the Slice Engineering Mosquito lately

Re: Nova Hotend

Posted: June 11th, 2019, 5:18 pm
by Roberts_Clif
LePaul wrote:
June 11th, 2019, 10:02 am
I haven't looked at it...I've been drooling over the Slice Engineering Mosquito lately
Well that also looks good with having a 50watt cartridge.