Nova Hotend
Posted: February 25th, 2019, 10:09 am
Nova Hot-end not endorsing - just requesting opinions.
Wanted to show you this Hot-End I ran across. If it works as good as Kick Starter claims maybe we should have discussion.
With 3 different power Heaters 60wt, 80wt and 100wt
An claims of 3D Printing at 300mm/sec thought I would bring it to the forums attention.
What does everyone think about the possibilities of 3D Printing at 300mm/sec.
I know this interests me even though my 3D Printer may never 3D Print at 300mm/sec.
Would be a substantial leap to double my current print Speed of 86mm/sec to 172mm/sec, though it may require some added Support Bracing.
Bring forth your opinions on the possibilities of this new Kick Starter Hot-end.
Wanted to show you this Hot-End I ran across. If it works as good as Kick Starter claims maybe we should have discussion.
With 3 different power Heaters 60wt, 80wt and 100wt
An claims of 3D Printing at 300mm/sec thought I would bring it to the forums attention.
What does everyone think about the possibilities of 3D Printing at 300mm/sec.
I know this interests me even though my 3D Printer may never 3D Print at 300mm/sec.
Would be a substantial leap to double my current print Speed of 86mm/sec to 172mm/sec, though it may require some added Support Bracing.
Bring forth your opinions on the possibilities of this new Kick Starter Hot-end.