I found this video and found it very interesting.
It states that part cooling fans decrease the strength of 3D Printed parts.
Re: Cooling Fan Speed vs Strength
Posted: October 19th, 2019, 10:07 am
by Roberts_Clif
I have now went to CNC Kitchen You-Tube Channel and found a trove of information.
If you like the other video then you may want to watch his Channel.
Including "Threaded Inserts in 3D Prints"
Re: Cooling Fan Speed vs Strength
Posted: November 5th, 2019, 3:47 pm
by LePaul
He has a good channel. I like his videos...especially his advice on more perimeters rather than more infill for strength
Re: Cooling Fan Speed vs Strength
Posted: November 6th, 2019, 8:05 am
by Roberts_Clif
LePaul wrote: ↑November 5th, 2019, 3:47 pm
He has a good channel. I like his videos...especially his advice on more perimeters rather than more infill for strength
That was good information!!!
Re: Cooling Fan Speed vs Strength
Posted: November 6th, 2019, 2:25 pm
by Mr SNG
Interesting video.
Currently I am viewing as many youtube videos as I can on my quest to produce prints that are nearing SLA quality using a 0.2 nozzle.
CHRIST! There is so much crap on Youtube out there, with total morons who talk total shite.
Initially the intros to "Tomb of 3D Printed Horrors" put me off watching the videos Us Brits are a little weird when things at the start are full on! However I have now watched three and they are packed with really good information. As I am typing this post I am printing off a part with his settings.