Page 1 of 1
BB-8 nGen time lapse
Posted: November 10th, 2016, 11:52 am
by LePaul
One of the good prints! 15.5 hours.
Re: BB-8 nGen time lapse
Posted: November 13th, 2016, 5:11 am
by Titus
Nice!
Re: BB-8 nGen time lapse
Posted: November 30th, 2016, 7:25 pm
by LePaul
Piece on the right is the eye surround piece for BB-8 done at 0.10. Left is the holoprojector done at 0.06
Re: BB-8 nGen time lapse
Posted: December 1st, 2016, 3:15 am
by Izzy
I take it you have solved your underextrusion problem with the filament feedeing into the feeder now?
Re: BB-8 nGen time lapse
Posted: December 1st, 2016, 9:22 am
by LePaul
Well the feeder guide under the feeder is in place The other one fell off! Apparently the threads in the plastic weren't enough to hold it on.
I'll just get a longer machine screw, drill out the mount plug and use a nylon lock metal nut to hold it in place for good
But yes...no spool or filament jams And upper the retraction distance to 5mm made 99% of the hairs go away
Re: BB-8 nGen time lapse
Posted: December 1st, 2016, 12:44 pm
by MTVDNA
Those prints look very nice. The layers in the holoprojector are barely visible.
Re: BB-8 nGen time lapse
Posted: December 1st, 2016, 2:00 pm
by LePaul
MTVDNA wrote:Those prints look very nice. The layers in the holoprojector are barely visible.
My first try with 0.06 ever and very happy with it. Really pleased with nGen too