Nozzle Hitting Problem

Have a print that has problems? Need some feedback? Post it here.
Vampire
Reactions:
Posts: 2
Joined: November 11th, 2020, 7:27 am
3D Printer(s): DIY. Marling Bugfix 1.1, Ramps 1.4, E3D V6 Hotend

Nozzle Hitting Problem

Post by Vampire »

I use Cura.
I built my printer myself. DIY printer.
I did a table calibration. Dimensions are fine.
You can watch the video. Especially the second 48.
I couldn't solve this problem. The nozzle hits the output.

https://drive.google.com/file/d/1CZFyr5 ... jYPrx/view

User avatar
LePaul
Reactions:
Posts: 3522
Joined: February 7th, 2016, 10:26 pm
Location: Bangor, Maine USA
3D Printer(s): I can't name all 14

Re: Nozzle Hitting Problem

Post by LePaul »

With Cura and Simplify3D, I also set Z hop /vertical lift to 1.0mm

User avatar
Roberts_Clif
Reactions:
Posts: 1099
Joined: March 25th, 2017, 8:17 am
Location: Washington
3D Printer(s): Hictop 3DP11/12

Re: Nozzle Hitting Problem

Post by Roberts_Clif »

Hello Vampire

Would you be so kind as to post your Cura version, Cura Profile, filament specs, style of 3D Printer.
Like to go through your settings to see if there could be some configuration changes that could help improve your current dilemma.

Some of the changes could include Z-Hop when retracting, Retraction speed and distance, Print Speed, Print temperature, ect. ect.
Electronics Technician / Computer Programmer

Vampire
Reactions:
Posts: 2
Joined: November 11th, 2020, 7:27 am
3D Printer(s): DIY. Marling Bugfix 1.1, Ramps 1.4, E3D V6 Hotend

Re: Nozzle Hitting Problem

Post by Vampire »

@Roberts_Clif
@LePaul

Thanks. I will upgrade the Y-axis of my printer and try again. I'll test it again with a 0.4mm nozzle in a few days.

Post Reply

Return to “Help me fix this print!”