PrusaSlicer

Let's talk about the slicers, CAD and other software you use for your prints
Post Reply
User avatar
Roberts_Clif
Reactions:
Posts: 1201
Joined: March 25th, 2017, 8:17 am
Location: Washington
3D Printer(s): Hictop 3DP11/12

PrusaSlicer

Post by Roberts_Clif »

Decided to print a pre-sliced model G-Code from Prusa Printers.
It printed perfectly. Now I need to go through the Modifier meshes tutorial to see how I can do this myself.


Printed On MY Hictop 3D12
Landing Pad.jpg

User avatar
Roberts_Clif
Reactions:
Posts: 1201
Joined: March 25th, 2017, 8:17 am
Location: Washington
3D Printer(s): Hictop 3DP11/12

Re: PrusaSlicer

Post by Roberts_Clif »

Another reason to start using PrusaSlicer

When slicing this Tablet Holder it would require a print time of 7 hours 19minutes to print model.
Slicing with a 0.24mm the print has a stair stepped ledge in the area painted green.
Tablet Holder.jpg
Using PrusaSlicer this area is used as a modifier where I can change the layer height to .06mm in the green area.
Thereby changing the print time to 3 hours 20 minutes. With a print model that looks much smoother and quite nice.
Laptop Holder.jpg

Post Reply

Return to “Slicers and CAD Software”