De-lamination of print

PLA that isn't any of the brands we have already made categories for? Talk about it here
Post Reply
Lez0
Reactions:
Posts: 206
Joined: October 8th, 2017, 10:21 am
Location: Spain
3D Printer(s): JGAurora A5S, Anycubic Photon

De-lamination of print

Post by Lez0 »

Hi all
I have a problem and I don't know if it's just the filament or me.
The prints don't seem to be strong between layers and sometimes the first layer can be pealed off.
Material Sunlu PLA 1.75mm Silk silver.
Bed temp 50°
Nozzle from 190 to 210°, according to there instructions, no difference in temp.
Cura 4.8.0 settings, bed 50°C
Cura 4.8.0
Cura 4.8.0
I have done different prints but have the same problem.
2021-03-03 13.53.14.jpg
Any ideas?
Thanks
Lez

Post Reply

Return to “PLA Filament General Discussion”