Here we are!
- LePaul
- Reactions:
- Posts: 3970
- Joined: February 7th, 2016, 10:26 pm
- Location: Bangor, Maine USA
- 3D Printer(s): 24 - Yes I have a problem!
- Contact:
Here we are!
Here we are...the forum has been up for 5 days!
I'm glad you guys have found the forum!
I'm glad you guys have found the forum!
-
- Reactions:
- Posts: 415
- Joined: February 8th, 2016, 8:37 pm
- Location: Uppsala, Sweden
- 3D Printer(s): UM2 UM2E, UM2Go, UM3, Delta Tower, Form 1+, Form 2
- Contact:
Re: Here we are!
Thank you for setting up the forum, LePaul!
Even thought we are only 20 users so far, this forum has led to a major improvement in my motivation to invent things!![Smile :)](./images/smilies/icon_e_smile.gif)
There are still DNS-issues nighttime in Europe, but apart from that works really well already I would say.
I think lots of people from the old Ultimaker-forum who disappeared when the forum was upgraded would be interested to join here, but it is a bit difficult to announce this forum to people who were inactive for almost a year.
Even thought we are only 20 users so far, this forum has led to a major improvement in my motivation to invent things!
![Smile :)](./images/smilies/icon_e_smile.gif)
There are still DNS-issues nighttime in Europe, but apart from that works really well already I would say.
I think lots of people from the old Ultimaker-forum who disappeared when the forum was upgraded would be interested to join here, but it is a bit difficult to announce this forum to people who were inactive for almost a year.
- LePaul
- Reactions:
- Posts: 3970
- Joined: February 7th, 2016, 10:26 pm
- Location: Bangor, Maine USA
- 3D Printer(s): 24 - Yes I have a problem!
- Contact:
Re: Here we are!
I hope they do.
I was told I am "splitting the community" buy doing this. I don't think that is the case at all. There's plenty of room for other venues to talk about our favorite printers.
I was told I am "splitting the community" buy doing this. I don't think that is the case at all. There's plenty of room for other venues to talk about our favorite printers.
-
- Reactions:
- Posts: 506
- Joined: February 9th, 2016, 9:56 am
- Location: Stuttgart, Germany
- 3D Printer(s): Ultimaker 2
Re: Here we are!
I assume that the people that told you "you are splitting the community" have @ultimaker.com email addresses and are just afraid that you are splitting the community from their data mining social media ruin that they call a forum. I wouldn't give much on that.
- Titus
- Reactions:
- Posts: 252
- Joined: February 9th, 2016, 10:20 pm
- 3D Printer(s): Ultimaker Original+HBK
Re: Here we are!
No more people are worried. I'm also a bit worried, I just hope this stays on the side/power users/improves the UM forums. If it really were to split the community it would be a bad thing.
-
- Reactions:
- Posts: 415
- Joined: February 8th, 2016, 8:37 pm
- Location: Uppsala, Sweden
- 3D Printer(s): UM2 UM2E, UM2Go, UM3, Delta Tower, Form 1+, Form 2
- Contact:
Re: Here we are!
I would say that most of the people who made me visit the old Ultimaker forum seems to have disliked the upgrade to the extent that they are more or less inactive on the current forum.
That part of the community is not that likely to come back to the Ultimaker forum unless there is major change.
So I see this as a new home for that group, who would not have been active at all otherwise, rather than some attempt to split the community.
Very few people at the current Ultimaker forum seems to care about things that I like and that were very popular at the old forum.
And in any case, Ultimaker has sold enough printers to support two communities the size of the old forum I believe, but Ultimaker is not exactly doing what they can to attract all those potential users.
So any "split" of the forum happened long time ago, when the current forum was introduced, I would say.
That part of the community is not that likely to come back to the Ultimaker forum unless there is major change.
So I see this as a new home for that group, who would not have been active at all otherwise, rather than some attempt to split the community.
Very few people at the current Ultimaker forum seems to care about things that I like and that were very popular at the old forum.
And in any case, Ultimaker has sold enough printers to support two communities the size of the old forum I believe, but Ultimaker is not exactly doing what they can to attract all those potential users.
So any "split" of the forum happened long time ago, when the current forum was introduced, I would say.
- LePaul
- Reactions:
- Posts: 3970
- Joined: February 7th, 2016, 10:26 pm
- Location: Bangor, Maine USA
- 3D Printer(s): 24 - Yes I have a problem!
- Contact:
Re: Here we are!
I know some of the Ultimaker staff I would love to hear from probably won't visit (Daid, etc) I wish they would I really learned a lot from them
- Titus
- Reactions:
- Posts: 252
- Joined: February 9th, 2016, 10:20 pm
- 3D Printer(s): Ultimaker Original+HBK
Re: Here we are!
Actually I think those specific people would love to visit
Not sure whether they would though, due to policy and stuff.
![Razz :P](./images/smilies/icon_razz.gif)
- Amedee
- Reactions:
- Posts: 599
- Joined: February 15th, 2016, 11:10 am
- Location: Brussels, Belgium
- 3D Printer(s): UMO / UMO+
- Contact:
Re: Here we are!
I am one of them, and the news didn't took too long to reach meAnders Olsson wrote: I think lots of people from the old Ultimaker-forum who disappeared when the forum was upgraded would be interested to join here, but it is a bit difficult to announce this forum to people who were inactive for almost a year.
![Wink ;-)](./images/smilies/icon_e_wink.gif)
- LePaul
- Reactions:
- Posts: 3970
- Joined: February 7th, 2016, 10:26 pm
- Location: Bangor, Maine USA
- 3D Printer(s): 24 - Yes I have a problem!
- Contact:
Re: Here we are!
And welcome! I hope Ultimaker staff isn't angry with us ?Amedee wrote:I am one of them, and the news didn't took too long to reach meAnders Olsson wrote: I think lots of people from the old Ultimaker-forum who disappeared when the forum was upgraded would be interested to join here, but it is a bit difficult to announce this forum to people who were inactive for almost a year.
- Amedee
- Reactions:
- Posts: 599
- Joined: February 15th, 2016, 11:10 am
- Location: Brussels, Belgium
- 3D Printer(s): UMO / UMO+
- Contact:
Re: Here we are!
Thank you!
And, from my side it does not make any difference. Since they decided to go for that community thing, I am only visiting their site when someone quotes me in a post, and I will continue to do so...
I see a lot of forums moving into 'something else' because they see erosion coming for social medias -- which to some extend is true, but that does not mean forums should disappear.
To their defense, I am an old fart; I just gave up on my old vt220 green terminal, so don't take my forum away![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
And, from my side it does not make any difference. Since they decided to go for that community thing, I am only visiting their site when someone quotes me in a post, and I will continue to do so...
I see a lot of forums moving into 'something else' because they see erosion coming for social medias -- which to some extend is true, but that does not mean forums should disappear.
To their defense, I am an old fart; I just gave up on my old vt220 green terminal, so don't take my forum away
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
-
- Reactions:
- Posts: 415
- Joined: February 8th, 2016, 8:37 pm
- Location: Uppsala, Sweden
- 3D Printer(s): UM2 UM2E, UM2Go, UM3, Delta Tower, Form 1+, Form 2
- Contact:
Re: Here we are!
That was exactly the reply I wanted to hearAmedee wrote:And, from my side it does not make any difference. Since they decided to go for that community thing, I am only visiting their site when someone quotes me in a post, and I will continue to do so...
![Smile :)](./images/smilies/icon_e_smile.gif)
Well, a few of them certainly are for sure..LePaul wrote:I hope Ultimaker staff isn't angry with us ?
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
I would say the reaction is a bit irrational though, hopefully they calm down a bit and start seeing the positive sides of this.
I mean: If this forum attracts users which the Ultimaker forum fails to attract and which otherwise would have been inactive, it will increase the total number of posts about Ultimaker at the Internet, which is a positive thing for Ultimaker.
- LePaul
- Reactions:
- Posts: 3970
- Joined: February 7th, 2016, 10:26 pm
- Location: Bangor, Maine USA
- 3D Printer(s): 24 - Yes I have a problem!
- Contact:
Re: Here we are!
Exactly!
I saw the continuing posts on the Feedback section of unhappy users. I frequent the forums daily, scrolling around looking for new and interesting discussions. Or help where I can. And the content level just keeps dropping
And that search function is awful and should be a priority.
So when I got a "heated" messagel from Ultimaker about splitting the community, I was a bit taken aback.
As Anders points out, this forum...and I am sure other sites elsewhere, show that there are many fans of these printers. And we're just looking for a better medium to share our experiences, learn new things and improve these wonderful devices.
I've also offered to help out on their site, create some tutorials wiki articles and the like. The offer still stands. But I haven't heard a thing. Last I knew they had a staff member or two working on that. The Wiki is long gone in favor of the Tips and Tricks link. It's a start.
I would LIKE to think Ultimaker is happy to see quality conversations going on about their product, even if it isn't on their site.
And that's why the forum is also public...you can read everything without a log-in. We've got nothing to hide. We aren't bashing anyone.
Sure we may disagree, but we do so thoughtfully and welcome other views.![Smile :)](./images/smilies/icon_e_smile.gif)
I saw the continuing posts on the Feedback section of unhappy users. I frequent the forums daily, scrolling around looking for new and interesting discussions. Or help where I can. And the content level just keeps dropping
And that search function is awful and should be a priority.
So when I got a "heated" messagel from Ultimaker about splitting the community, I was a bit taken aback.
As Anders points out, this forum...and I am sure other sites elsewhere, show that there are many fans of these printers. And we're just looking for a better medium to share our experiences, learn new things and improve these wonderful devices.
I've also offered to help out on their site, create some tutorials wiki articles and the like. The offer still stands. But I haven't heard a thing. Last I knew they had a staff member or two working on that. The Wiki is long gone in favor of the Tips and Tricks link. It's a start.
I would LIKE to think Ultimaker is happy to see quality conversations going on about their product, even if it isn't on their site.
And that's why the forum is also public...you can read everything without a log-in. We've got nothing to hide. We aren't bashing anyone.
Sure we may disagree, but we do so thoughtfully and welcome other views.
![Smile :)](./images/smilies/icon_e_smile.gif)
-
- Reactions:
- Posts: 415
- Joined: February 8th, 2016, 8:37 pm
- Location: Uppsala, Sweden
- 3D Printer(s): UM2 UM2E, UM2Go, UM3, Delta Tower, Form 1+, Form 2
- Contact:
Re: Here we are!
It just turned out that when I provided some more comprehensive information to certain people regarding the forum situation, things became much easier to understand.
So I am hopeful that things will calm down a bit and in the end turn out in a good way.
I wish I could cite some things from that email by the way, but I really have to keep my mouth shut this time![Smile :)](./images/smilies/icon_e_smile.gif)
So I am hopeful that things will calm down a bit and in the end turn out in a good way.
I wish I could cite some things from that email by the way, but I really have to keep my mouth shut this time
![Smile :)](./images/smilies/icon_e_smile.gif)
- chopmeister
- Reactions:
- Posts: 14
- Joined: February 15th, 2016, 6:34 am
- Location: Zagreb, Croatia
- 3D Printer(s): Ultimaker Original rev.3
- Contact:
Re: Here we are!
I have to say I used to enjoy the old, old ultimaker forums, and the UM google group before that, but as it started to get swamped by users, I got a bit lost in all the threads. I preferred it much more when there was just a bunch of people experimenting like crazy with various stuff all eager to make their machines better. The community thing is really not my cup of tea... this is promising though. ![Smile :)](./images/smilies/icon_e_smile.gif)
![Smile :)](./images/smilies/icon_e_smile.gif)