3D Printing Forum

no

This example is much better

Details about the patent
http://www.disruptivemagazine.com/opini ... e-platform
and here http://www.freepatentsonline.com/20150093465.pdf

And with other filament like PETG ?

About PEI Heat Bed : http://reprap.org/wiki/PEI_build_surface

CF20 is based on XT...

Thank You Anders !

Tout a fait d'accord avec toi ! L'idée étant d'avoir une calibration pile poil... sur une pièce, je devais avoir un ergot de 0.4 mm d'épaisseur et après l'impression, j'avais 0.28 d'où ma remise en question de la calibration ! Je suis en train d'essayer une nouvelle procédure : je vous tiens au jus ...

You are right Amedee. The question now is how to calibrate the bed to be close to 0 offset...

To calibrate the bed, I used a 0.1 gauge and yesterday, I use the "adjust Z position" in the Tinker firmware and calibrated the space between the nozzle and the bed with a 0.05 gauge, with the button I substract 0.05 so for me (and the printer by the way), the space between the nozzle and ...

Little test this morning. I draw a little staircase : size X 100 mm x Y 10 mm x Z 1 mm + 0.1 mm every 10 mm Here is the result of the print : nozzle : 0.4 layer : 0.1 initial layer : 0 https://ultimaker.com/photo/image/0x0/56dfe7863e1c5/WP_20160309_001.jpg the average difference between the staircas...

Thanks for this information, I understand better now and I'm going to validate all these points.

David.

Can someone explain to me how to use this function or how it works?

Merci !

...french sausages with Belgian fries...

GCode n'est pas mon ami ! Il devrait mais non
Gcode is not my friend ! It should but not