3D Printing Forum

Congratulations!
Does this enter in the Guinness world records for the most expensive nozzle?

I'm working with some plastic which extrudes well at 170°C. Perhaps you can go a little lower than 185° depending on your PLA properties

Thanks, will test this out in the next days

Short one: which Marlin version have you used from Prusa side? Has it something to do with the official Marlin which is currently in RC8? good question btw. I have no clue on which marlin the prusa version is based upon... but for sure newer than UMO :) Might be worth considering RC8 in this instan...

Thanks Martin! :) The main feature as of now is indeed just the bed leveling part, but from what i'm seeing in Marlin, there's a lot of pieces of code/parts that have been left abandoned (and were removed by the Prusa guys too). My intention would be to make the firmware lighter too and easy to conf...

Ok, any stl files that you would recommend?
Post a link and I'll test that one.

Just one request: don't make it take longer than 30-40 mins per piece if possible

Hi Martin,

I think if we do a "fix" it'll still keep the two branches separate.
If we do a Merge, it would allow to bring the UMO firmware to a point in which we can easily incorporate new improvements/additions to the firmware in a more seamless way.

Your thoughts?

Tested!

Here's the visual result.
On the left the BEFORE (so original motion settings: Accel: 4000 & Vxy-jerk: 20) on the right the AFTER (Accel: 3000 & Vxy-jerk: 12)
Just me or it's more or less the same?

Hey Martin, glad to have you on board! I lack time too and this won't be a fast project to be completed, but if you have a couple of spare hours it'd be great to catch up on Skype and work together on the missing bits if you're up for it :) I've sent you a PM :) Edit: I now edited the code at the to...

Well...for the sake of science I'll test this out and add here a picture of the results

Still looking forward more people interested in joining the fun!

Is this in Amedee's firmware or are you using a different branch?

What improvements have you noticed?
Can you show two comparison prints with the two settings?

This one: https://github.com/prusa3d/Prusa-Firmware

Hey, I'm already using a PEI sheet as printing surface. This PEI sheet is directly attacched with a 3M adhesive on top of the aluminum bed. Below the bed there is the glass (to prevent/counter bed bending). As far as I have tested this probe is able to detect the metal successfully when placed at a ...