So say we all - oh wait!
I'll be curious your opinion of the material you've purchased
Search found 3977 matches
- May 2nd, 2023, 6:29 pm
- Forum: Filament and printing material
- Topic: Which is good quality filament
- Replies: 8
- Views: 13446
- May 2nd, 2023, 6:27 pm
- Forum: Help me fix this print!
- Topic: Help with Creality CR-10 V3 clogging
- Replies: 1
- Views: 2265
Re: Help with Creality CR-10 V3 clogging
Those Creality stock hotends can be problematic Have you checked the tube inside the hot end and checked if it is cooked/narrowed?
- May 1st, 2023, 6:45 pm
- Forum: Filament and printing material
- Topic: Which is good quality filament
- Replies: 8
- Views: 13446
- April 30th, 2023, 12:20 pm
- Forum: Help me fix this print!
- Topic: Print not smooth part way through
- Replies: 1
- Views: 1654
Re: Print not smooth part way through
What material?
- April 29th, 2023, 7:33 pm
- Forum: Filament and printing material
- Topic: Which is good quality filament
- Replies: 8
- Views: 13446
Re: Which is good quality filament
I've been using a lot of the Matterhacker brands as of late. Pro Series PLA and they also have the less expensive Build Series too Pro series has a higher diameter tolerance of 0.02 while Build is +/- 0.05 Still great specs
https://www.matterhackers.com/store/c/m ... r-filament
https://www.matterhackers.com/store/c/m ... r-filament
- April 24th, 2023, 5:12 pm
- Forum: Resin 3D Printers
- Topic: Anycubic Photon M3 Premium
- Replies: 5
- Views: 11291
- April 24th, 2023, 5:03 pm
- Forum: Resin 3D Printers
- Topic: Anycubic Photon M3 Premium
- Replies: 5
- Views: 11291
- April 23rd, 2023, 7:57 pm
- Forum: Filament and printing material
- Topic: Ninjaflex alternatives
- Replies: 1
- Views: 6833
Re: Ninjaflex alternatives
I've use Ninjaflex Cheetah but it's a harder TPU
- April 22nd, 2023, 1:40 pm
- Forum: Resin 3D Printers
- Topic: Anycubic Photon M3 Premium
- Replies: 5
- Views: 11291
Re: Anycubic Photon M3 Premium
Safety, Paul would want me to remind you that you are working with chemicals, so wear gloves and glasses, and print in a well ventilated room. Enjoy Les Yes! If you read the safety data sheets on those resins, you will be very surprised how dangerous contact with those resins are. I probably repeat...
- April 20th, 2023, 9:27 pm
- Forum: General 3D Printing Conversation
- Topic: Sidewinder X2 ABL probes
- Replies: 2
- Views: 3965
Re: Sidewinder X2 ABL probes
Is it a BL Touch knock off?
If so you could use/try this
https://www.filastruder.com/products/bl ... 978f&_ss=r
If so you could use/try this
https://www.filastruder.com/products/bl ... 978f&_ss=r
- April 20th, 2023, 9:26 pm
- Forum: General 3D Printing Conversation
- Topic: Ender-3 S1 Pro display stuck at "CREALITY"
- Replies: 1
- Views: 3788
Re: Ender-3 S1 Pro display stuck at "CREALITY"
I came across this thread
- April 20th, 2023, 9:23 pm
- Forum: Firmware
- Topic: Anycubic S firmware crash
- Replies: 3
- Views: 4966
Re: Anycubic S firmware crash
If you want professional quality, you'll want to consider quality equipment. Anycubic certainly isnt that.
Id look at machines like the Bambu Labs, Prusa or Ultimaker
Id look at machines like the Bambu Labs, Prusa or Ultimaker
- April 16th, 2023, 10:56 pm
- Forum: Resin 3D Printers
- Topic: Anycubic Photon M3 Premium
- Replies: 2
- Views: 2364
Re: Anycubic Photon M3 Premium
I thought Lychee and Chitubox were the best ones for resin?
- April 15th, 2023, 1:20 pm
- Forum: Firmware
- Topic: Anycubic S firmware crash
- Replies: 3
- Views: 4966
Re: Anycubic S firmware crash
I've become a fan of the Reddit groups, so you might start there. Or the Facebook group if you have social media
You could also check the Anycubic site and I believe they offer some level of support, so you could check there for the stock or latest version of the firmware for that model
You could also check the Anycubic site and I believe they offer some level of support, so you could check there for the stock or latest version of the firmware for that model
- April 15th, 2023, 1:17 pm
- Forum: General 3D Printing Conversation
- Topic: Creality 3 extruder jamming
- Replies: 3
- Views: 3960
Re: Creality 3 extruder jamming
I'd do some PID Autotune testing of your hot end, just to see if it is struggling to maintain temp
https://teachingtechyt.github.io/calibration.html#pid
Id think if the hot end is struggling you might get some temp errors on the controller.
https://teachingtechyt.github.io/calibration.html#pid
Id think if the hot end is struggling you might get some temp errors on the controller.