Search found 74 matches
- October 30th, 2019, 4:27 am
- Forum: General 3D Printing Conversation
- Topic: Z AXIS CRASHING
- Replies: 2
- Views: 6178
Re: Z AXIS CRASHING
I had this problem when I set up my Hictop printer for the first time. What my issue was, the bed level sensor was adjusted to high. So if your machine is fitted with sensor on the Z axis that would be the first place I would be looking at. If the sensor is correctly adjusted then It could possibly ...
- October 29th, 2019, 4:09 pm
- Forum: Cura
- Topic: Noob with Cura - HELP
- Replies: 9
- Views: 11874
Re: Noob with Cura - HELP
@ Roberts _Clif Wow! I'm flattered......Never thought in a million years I could teach you something! I guess the saying's are true "Every day your a beginner" or " Your learn something new every day" Having said that you helped me learn a heck of lot in such a short time......t...
- October 28th, 2019, 4:24 pm
- Forum: Cura
- Topic: Noob with Cura - HELP
- Replies: 9
- Views: 11874
Re: Noob with Cura - HELP
I use an Ultimate 2+ printer at a library so do my software setup offline at home. I loaded Cura but am having a hard time getting anywhere. I loaded my model (STL file) and it's very small (100mm x 100mm x 20mm) and barely shows in the display. Isn't it possible to zoom in ? (I can at the library ...
- October 26th, 2019, 4:06 am
- Forum: Show off your latest print
- Topic: Show off My latest Print
- Replies: 176
- Views: 204595
Re: Show off My latest Print
It would be really cool if we could see a larger image!
- October 22nd, 2019, 1:04 pm
- Forum: Hardware Modifications
- Topic: The Twins
- Replies: 6
- Views: 15126
Re: The Twins
As with any thermo plastic it will let you know if things are too hot. The worst one is acetal (POM) that will get the eyes streaming !
- October 22nd, 2019, 4:55 am
- Forum: Hardware Modifications
- Topic: The Twins
- Replies: 6
- Views: 15126
Re: The Twins
ABS would be my choice for strength but I haven't tried it in my printer yet, I have only used this material in my mould injection machines!Roberts_Clif wrote: ↑August 22nd, 2018, 10:39 am However may try a different filament than PLA to get a stronger part holder on the wall.
What would you suggest for a 3D Printer that has only printed PLA.
- October 22nd, 2019, 3:56 am
- Forum: Software and Firmware Discussion
- Topic: Marlin 1.1.9 Setup Problems
- Replies: 16
- Views: 22649
Re: Marlin 1.1.9 Setup Problems
Just googled 'Marlin Baby Setting' now fully understand about this cool feature.
Thanks again for another useful heads up.
Thanks again for another useful heads up.
- October 21st, 2019, 4:44 pm
- Forum: Software and Firmware Discussion
- Topic: Marlin 1.1.9 Setup Problems
- Replies: 16
- Views: 22649
Re: Marlin 1.1.9 Setup Problems
So how do you tweak Z when the machine is printing?
- October 20th, 2019, 2:39 pm
- Forum: Software and Firmware Discussion
- Topic: Marlin 1.1.9 Setup Problems
- Replies: 16
- Views: 22649
Re: Marlin 1.1.9 Setup Problems
Corrected that now.
One other issue was initial print layer speed I didn't need to include that as Cura 4.3 has a detailed configuration in its Speed drop down menu.
So far so good......Prints are really starting to look very neat, I'm very pleased with the progress.
One other issue was initial print layer speed I didn't need to include that as Cura 4.3 has a detailed configuration in its Speed drop down menu.
So far so good......Prints are really starting to look very neat, I'm very pleased with the progress.
- October 20th, 2019, 12:41 pm
- Forum: Software and Firmware Discussion
- Topic: Marlin 1.1.9 Setup Problems
- Replies: 16
- Views: 22649
Re: Marlin 1.1.9 Setup Problems
This is my Start G-Code at present, do you feel it could be tweaked a bit more? G21 ;metric values G90 ;absolute positioning M82 ;set extruder to absolute mode M107 ;start with the fan off G28 X0 Y0 ;move X/Y to min endstops G28 Z0 ;move Z to min endstops G1 Z15.0 F9000 ;move the platform down 15mm ...
- October 18th, 2019, 12:42 pm
- Forum: Software and Firmware Discussion
- Topic: Marlin 1.1.9 Setup Problems
- Replies: 16
- Views: 22649
Re: Marlin 1.1.9 Setup Problems
How come you have G28 X0 Y0 entered twice?
- October 18th, 2019, 12:13 pm
- Forum: Software and Firmware Discussion
- Topic: Marlin 1.1.9 Setup Problems
- Replies: 16
- Views: 22649
Re: Marlin 1.1.9 Setup Problems
Ah right I understand now. So M420 should it be entered just before M117 Printing..... G21 ;metric values G90 ;absolute positioning M82 ;set extruder to absolute mode M107 ;start with the fan off G28 X0 Y0 ;move X/Y to min endstops G28 Z0 ;move Z to min endstops G1 Z15.0 F9000 ;move the platform dow...
- October 18th, 2019, 10:34 am
- Forum: Software and Firmware Discussion
- Topic: Marlin 1.1.9 Setup Problems
- Replies: 16
- Views: 22649
Re: Marlin 1.1.9 Setup Problems
No I didn't know I could save the leveling data, still got a lot learning to do! From what I can see there is only one line that includes M500 and that is active in the 'Unified Bed Leveling' section. So do I need to add a command before G28? #define RESTORE_LEVELING_AFTER_G28 /** * Enable detailed ...
- October 18th, 2019, 8:32 am
- Forum: Software and Firmware Discussion
- Topic: Marlin 1.1.9 Setup Problems
- Replies: 16
- Views: 22649
Re: Marlin 1.1.9 Setup Problems
Many thanks for your reply Adrian. I have now fine tuned and saved the settings for the Z axis. I now use the 'Auto Home' function every time I power up the machine for printing. However one function I am going to alter in Arduino is the grid points in the bed leveling section, I feel 36 grid points...
- October 17th, 2019, 10:23 am
- Forum: Software and Firmware Discussion
- Topic: Marlin 1.1.9 Setup Problems
- Replies: 16
- Views: 22649
Marlin 1.1.9 Setup Problems
Having now uploaded this version of firmware to my printer I am however encountering a few issues. One issue that is really bugging me is that when the machine is powered up the display shows a question mark next to the X,Y & Z axes, after homing the three axis then all seems to be okay. So the ...