3D Printing Forum

What camera do you use to take the pictures?

It' never too late : http://support.3dverkstan.se/article/64 ... lus-feeder

LePaul wrote:
The only French I know is the French-Canadien ('Old French") dialect. Much different than Paris-French

For the avoidance of doubt, there is no such thing as 'French-Canadien'. There is the French language and there are mistakes.

Thanks to online translators ! (and those who speak french !)

Pour les écrous : http://www.visseriefixations.fr/ecrous/ ... blanc.html

Question : pourquoi ne pas utiliser des écrous carrés iso à la place des classiques hexagonaux : la surface d'appui serait plus "mécanique".
Je pense faire ça de mon côté dès que j'ai un écrou à noyer ou un montage à faire.

ça risque de me piquer les yeux en coupant les courroies mais j'avoue le concept est vraiment intéressant !

100 % ≠ to 99.99% but not so far....

On CURA 2.3.1, the 0.3 "Infill Layer Thickness" tweak works fine from 1% infill to 30% infill.

Yes, the 99.99% Infill tweak is good to reduce printing time ! I will never print with 100% Infill now !

Good one. True true, just more %. Anyhow I never use this stuff since I don't print anything that requires specific strength. I wonder if there's actual tests showing how much % you gain by doing it this way or how much time yu save. CURA 2.3.1 Cube 20x20x20 0.4 nozzle Wall @ 1.05 (3 walls) speed @...

New test 20x20x20 cube at 40 mm/s for the walls and the infill Layer Height @ 0.1 The flow for the infill @ 0.1 is 1.4 mm3/s The flow for the infill @ 0.3 is 4.2 mm3/s So the Infill @ 0.3 height is a true 0.3 Infill as you can see on the picture http://io3.fr/Portals/io3/4theWeb/IMG_20170122_1549419...

(My printer is an UM2 with the UM2+ feeder)

Yep ! 20x20x20 cube 0.4 nozzle Layer Height : 0.1 Initial Layer Height : 0.2 Wall Thickness : 1.05 mm Wall Count : 3 Infill Density : 15 % Infill Layer Thickness : 0.3 Infill Speed : 60 mm/s Outer Wall Speed : 40 mm/s Inner Wall Speed : 50 mm/s Top/Bottom Speed : 30 mm/s Travel Speed : 200 mm/s Init...

CURA 2.3.1 do this. You must activate the value "Infill Layer Thickness" in the Infill parameters. According my parameters, this part was print with : Layer height : 0.1 initial layer height : 0.2 ... Infill Layer Thickness : 0.3 CURA was printing the 3 first infill @ 0.1 BUT all the reste...

Anders, you can add PETG/Carbon from NANOVIA TECHNOLOGIES filament for the compatibility with the ruby nozzle.
https://twitter.com/_darkdvd/status/820216901490053120

The year 2017 promises to be a great year for the UM2 !