That's how I found the .7mm discrepancy.
Printing calibration tests now.
Search found 20 matches
- November 9th, 2017, 3:57 pm
- Forum: Software and Firmware Discussion
- Topic: adjusting for dimensional accuracy?
- Replies: 8
- Views: 15721
- November 9th, 2017, 3:00 pm
- Forum: Software and Firmware Discussion
- Topic: adjusting for dimensional accuracy?
- Replies: 8
- Views: 15721
Re: adjusting for dimensional accuracy?
Thanks. I'll have to do some test'n'measures.
- November 9th, 2017, 12:34 pm
- Forum: Software and Firmware Discussion
- Topic: adjusting for dimensional accuracy?
- Replies: 8
- Views: 15721
Re: adjusting for dimensional accuracy?
M92 will just set the steps/unit though. Can I do partial steps? Also, what does the M92 line look like for X and Y?
- November 9th, 2017, 10:15 am
- Forum: Software and Firmware Discussion
- Topic: adjusting for dimensional accuracy?
- Replies: 8
- Views: 15721
adjusting for dimensional accuracy?
hictop i3 on 1.6.1
I'm losing about .7mm per 100mm on a print (both x and y), is the best method to resolve this to change the default axis steps per unit? currently set at x 80 and y 80. 80x1.007 is 80.56 so it looks like I can be ~.07 under, or ~.06 over.
...or is there another way?
I'm losing about .7mm per 100mm on a print (both x and y), is the best method to resolve this to change the default axis steps per unit? currently set at x 80 and y 80. 80x1.007 is 80.56 so it looks like I can be ~.07 under, or ~.06 over.
...or is there another way?
- October 21st, 2017, 10:44 pm
- Forum: Software and Firmware Discussion
- Topic: Firmware Marlin-1.1.0-RC6 - My Latest Version
- Replies: 73
- Views: 489440
Re: Firmware Marlin-1.1.0-RC6 - My Latest Version
Which settings specifically?
- October 21st, 2017, 3:09 pm
- Forum: Software and Firmware Discussion
- Topic: Firmware Marlin-1.1.0-RC6 - My Latest Version
- Replies: 73
- Views: 489440
Re: Firmware Marlin-1.1.0-RC6 - My Latest Version
I've got it sorted. manual mesh leveling etc all running nicely (at least for this first test print). Will be ordering up a bltouch for this unit soon.
- October 21st, 2017, 1:56 pm
- Forum: Software and Firmware Discussion
- Topic: manual MESH_BED_LEVELING howto?
- Replies: 7
- Views: 11876
Re: manual MESH_BED_LEVELING howto?
ok, so I figured it out, had an uncaught error in the comment of LCD bed-leveling... but now that I have your attention.. I'm running through the bed leveling routine using a piece of paper as the guage. setting it just above where the paper grabs. This is how I've been manually leveling printers fo...
- October 21st, 2017, 1:07 pm
- Forum: Software and Firmware Discussion
- Topic: manual MESH_BED_LEVELING howto?
- Replies: 7
- Views: 11876
Re: manual MESH_BED_LEVELING howto?
I do get an 'Err: Too far!'
- October 21st, 2017, 1:03 pm
- Forum: Software and Firmware Discussion
- Topic: manual MESH_BED_LEVELING howto?
- Replies: 7
- Views: 11876
manual MESH_BED_LEVELING howto?
I'm trying to enable mesh bed leveling via #define MESH_BED_LEVELING in marlin 1.6.1. I've hot a hictop i3 with an aluminum plate bed that is warping just enough to blow my prints and make manual leveling impossible. When I go to prepare>bed leveling, the printer performs the auto-home sequence, hit...
- October 21st, 2017, 12:58 pm
- Forum: Software and Firmware Discussion
- Topic: Firmware Marlin-1.1.0-RC6 - My Latest Version
- Replies: 73
- Views: 489440
Re: Firmware Marlin-1.1.0-RC6 - My Latest Version
I've set reverse endstops to true which resolved that. I'm trying to enable mesh bed leveling (manual) which is just doing the auto-home routine. I'll start a new thread for that.
- October 21st, 2017, 12:17 pm
- Forum: Software and Firmware Discussion
- Topic: Firmware Marlin-1.1.0-RC6 - My Latest Version
- Replies: 73
- Views: 489440
Re: Firmware Marlin-1.1.0-RC6 - My Latest Version
sorry for the delayed response.
firmware flashed, screen is working. homing of all axis is backward though. steps are correct, ie x+1 moves gantry right, z+1 raises it.
firmware flashed, screen is working. homing of all axis is backward though. steps are correct, ie x+1 moves gantry right, z+1 raises it.
- October 11th, 2017, 1:48 pm
- Forum: Software and Firmware Discussion
- Topic: Firmware Marlin-1.1.0-RC6 - My Latest Version
- Replies: 73
- Views: 489440
Re: Firmware Marlin-1.1.0-RC6 - My Latest Version
Usually SD card, but there is a print running on the hictop right now so I have to wait it out.
- October 11th, 2017, 1:13 pm
- Forum: Software and Firmware Discussion
- Topic: Firmware Marlin-1.1.0-RC6 - My Latest Version
- Replies: 73
- Views: 489440
Re: Firmware Marlin-1.1.0-RC6 - My Latest Version
ok, got it. I've got about an hour left on a print then I'll work on this.
- October 11th, 2017, 12:47 pm
- Forum: Software and Firmware Discussion
- Topic: Firmware Marlin-1.1.0-RC6 - My Latest Version
- Replies: 73
- Views: 489440
Re: Firmware Marlin-1.1.0-RC6 - My Latest Version
Thanks Clif, where are the configuration.h and configuration_adv.h files you posted?
- October 11th, 2017, 10:16 am
- Forum: Software and Firmware Discussion
- Topic: Firmware Marlin-1.1.0-RC6 - My Latest Version
- Replies: 73
- Views: 489440
Re: Firmware Marlin-1.1.0-RC6 - My Latest Version
re-extracted, changed only the baud to 115200, upload. same result.