Search found 7 matches
- March 14th, 2022, 2:56 pm
- Forum: Help me fix this print!
- Topic: Ridges now in all of my prints
- Replies: 1
- Views: 1384
Re: Ridges now in all of my prints
It almost sounds like the film at the bottom of the vat might need replacing? How often do you empty out and clean the vat? When you look at the film, does it look to be old, or cloudy, or in anyway misshapen? It could also be that the film is loose, and might need tightening? I don't know much abou...
- March 14th, 2022, 2:48 pm
- Forum: Help me fix this print!
- Topic: Ripples on corners after changing Nozzle
- Replies: 7
- Views: 2256
Re: Ripples on corners after changing Nozzle
Just a final follow-up on this issue. After getting the Nozzle assembly ordered, which turned out to only be $65, and installing it on the printer, I had a bit of tuning and calibration to do, but it is now printing with high quality again. I did tweak some slicer settings, specifically turning on j...
- February 24th, 2022, 4:17 pm
- Forum: Help me fix this print!
- Topic: Ripples on corners after changing Nozzle
- Replies: 7
- Views: 2256
Re: Ripples on corners after changing Nozzle
Update, it turns out the entire print head assembly needs to be replaced. The device lost control of it's temperature, and thinks that it is sitting at 1025°C, on top of the other issues, I decided to call Customer support, and they instantly resorted to replacing the entire assembly. I look at this...
- February 24th, 2022, 2:29 pm
- Forum: Help me fix this print!
- Topic: Ripples on corners after changing Nozzle
- Replies: 7
- Views: 2256
Re: Ripples on corners after changing Nozzle
It would be interesting watching a video while this happening. Maybe we could see something you are missing. We would need to see a wide angle showing lead screws and a close view showing print at the same instance. Believe me this will not be an easy task though in order to troubleshoot sometimes ...
- February 24th, 2022, 12:10 pm
- Forum: Help me fix this print!
- Topic: Ripples on corners after changing Nozzle
- Replies: 7
- Views: 2256
Re: New Steel Nozzle Quality Drop
After switching it back to the old nozzle and running another print, it turns out it is NOT the nozzle that was the issue, despite it starting to happen when I switched the nozzle in the first place, this print on the old nozzle turned out exactly the same. IMG_20220224_120134944[1].jpg I am at a lo...
- February 23rd, 2022, 4:29 pm
- Forum: Help me fix this print!
- Topic: Ripples on corners after changing Nozzle
- Replies: 7
- Views: 2256
Re: New Steel Nozzle Quality Drop
I ran another print with the same Temp settings and the fan at 50% speed. Still seem to be having the same issue, so it doesn't look like it'll be the fan that will fix this... IMG_20220223_154948478[1].jpg I also ran another one using the printer over-ride default settings just to see what it does....
- February 23rd, 2022, 2:46 pm
- Forum: Help me fix this print!
- Topic: Ripples on corners after changing Nozzle
- Replies: 7
- Views: 2256
Ripples on corners after changing Nozzle
Hello, I have been working with a Dremel Digilab 3D45 printer from brand new for the past 8 months, and it has been handling just about anything I have thrown at it. It had gotten up to around 900 hours when I noticed the print quality had kinda started dropping, I had a lot more stringing than befo...